Veken Ultra-Slim Bidet, Non-Electric Dual Nozzle (Posterior/Feminine Wash)

Description

From the manufacturer
Retractable Nozzle & Nozzle Guard Gate
The nozzle guard gate offers extra protection and ensures our bidet is always ready for a clean operation. When the bidet is turned on, the corresponding nozzle will drop below the guard, when it’s not in use, the nozzle retracts for optimal protection.
Brass Water Inlet
Compared to other traditional plastic threaded interface, our bidet comes with a brass water inlet, which makes the stainless steel braided hose more compatible with the threaded interface, reducing the risk of product wear and water leakage.
High Compatibility
This upgraded ultra-slim bidet offers a better toilet seat fit, reducing the risk of water splashing out of the gap. The bidet’s force area and pressure is balanced when seating on the toilet. Our bidet are built to stand the test of time.
3 Extra Seat Bumpers
Although our bidet is slimmer than others, with almost no gaps, we also provide 3 extra bumpers for your convenience. Clean only the toilet seat rings and keep it dry. Stick the bumpers on a flat surface according to the toilet seat radian and spread them out.
Still don’t know the installation of water pipes?
Step 1: Turn OFF the water supply valve at the wall next to your toilet. Then Flush the toilet and hold down the handle to completely empty the toilet tank.
Step 2: Confirm that the small black rubber washer is inside the top of your bidet’s T-connector. (hint: the top of the T-connector is where the swivel nut is).
Step 3: Connect the T-valve to the toilet fill valve. Attach the water supply hose to the bottom of the T-valve. Finally, connect one end of the bidet hose provided to the side of the T-valve.
Step 4: Screw the other end of the bidet hose provided onto the bidet water inlet. Turn the water supply valve back on. If you notice any loose or leaking connection, you may need to add some Teflon tape.
Still not sure if the bidet fits for your toilet?
A. The size from the center of the toilet to the edge should not exceed 7.87 inch.
B. Spacing between screw holes: 4.33”-7.48”.
C. Spacing between screw holes and bowl: at least 1.18”.
D. Spacing between screw holes and toilet seat edge:1.97”-3.54”.
E. Spacing between the center of bidet and wall: at least 12.2”.
Package Includes
1 x Ultra-slim Dual Nozzle Bidet
1 x Stainless Steel Flexible Hose (2.13 ft)
1 x Brass T-connector (American standard)
1 x Teflon Tape
1 x Assembly Instruction
3 x Bidet Toilet Seat Bumpers