-40%
Active FET Probe, 1000 MHz, Very High Input Impedance, GHz Bandwidth, FETPROBE1
$ 105.57
- Description
- Size Guide
Description
Mathews EngineeringModel:
FETPROBE1
High input impedance low noise FET Probe.
The Mathews Engineering FETPROBE1 is an AC coupled, high impedance, RF probe intended for industrial and laboratory use. This probe has 1X gain from 100 kHz to 1 GHz and works into the 50Ω loads commonly found on RF test & measurement equipment. Because the probe is AC coupled, DC input impedance is greater than 10 GΩ and AC input impedance is dominated primarily by the parasitic capacitance of the probe tip which is about 3.5 pF.
Key Specifications:
100 kHz-1000 MHz Bandwidth
Input: AC coupled 3.5 pF, spring action "pogo" pins
High resistance to damage from DC and AC overloads
Output: 50 Ohms, SMA(m) or BNC(m) with included adapter
Gain: 1X into 50 ohms
Very low noise, virtually no spurious
Operates from 110 VAC
Full specifications show with product images
Applications:
Turns any 50 ohm input into a high-Z probe input
Troubleshoot RF circuits to 1 GHz
Network analysis (Hi-Z A/B sweeps on 50Ω gear)
IF Strip Engineering, RF engineering
What's Included:
FETPROBE1 probe assembly
1m (40”) FETPROBE1 combined RF & power cable assembly
SMA(f) to BNC(m) adapter
110 VAC to 9
VDC
wall adapter
User's Manual
Factory New & Made in the
USA
Shipping weight is 0.5 lbs.
Indiana Residents Must Pay 7% Sales Tax
Ships to US customers or countries supported by the eBay global shipping program.