100 MHz Oscilloscope Probe, x1 / x10 Switchable

Description

The HP-9100 is a passive high impedance oscilloscope probe designed and calibrated for use with instruments having an input impedance of 1 M
Ω
shunted by 20pF. However, it may be compensated for use with instruments having an input capacitance of 10 to 30pF.
The probe incorporates a three position slide switch in
the head which selects attenuation of x1, x10 or a ground reference position:
Position X10
Attenuation Ratio: 10:1
Bandwidth
:
DC to 100MHz
Rise Time
:
3.5nS
Input Resistance
:
10MΩ when used with oscilloscopes which have 1MΩ
input.
Input Capacitance
:
Approx. 13 pF
Compensation Range
:
10 to 30 pF
Working Voltage
:
600V CAT I, 300V CAT II (DC + peak AC) derating with frequency
Position REF
Probe tip opened, oscilloscope input grounded
Position X1
Attenuation Ratio: 1:1
Bandwidth: DC to 6MHz
Rise Time: 58nS
Input Resistance: 1MΩ (oscilloscope input resistance)
Input Capacitance: 56 pF plus oscilloscope capacitance
Working Voltage: 300V CAT I, 150V CAT II (DC + peak AC) derating with frequency
Position Ref: Probe tip disconnected, oscilloscope input grounded
Includes 1 ea. probe, spring hook, ground lead, insulating tip, measuring tip, IC tip, adjusting tool, channel identifier clip, BNC adapter.
Cable Length
: Approx. 4 feet